Activity Stream

I was always told they squeak until you have paid the cobbler :)

have you tried turning the adjuster both ways?they can be very tight

also i think you check the rear end oil with the engine ticking over

There should be a Nato Stock Number (NSN) on that black plate. googling that might reveal all!

Its not LEDs as such is the way they are powered, there will be the control unit built into them that pulses them on and off at about 100Hz, this is...

cheers but I was lucky enough to get a set of paper ones with the tractor that seem pretty detailed. Injector pump drive seal went at the weekend...

Sorry, SOLD

Hello,i have the same problem, Where i can find the fuse ?

Looks like I just got in before you Pete!! Modern day universal tractor transmission oil--UTTO, is fine in these.

Yes the Doncaster built tractors are all in one from the gearbox through to the rear including the oil immersed brakes. All the hydraulics share that...

Just to clarify,the gearbox and transmission share the same oil on a 574. Hytran is the original recommendation but any UTTO 10w30 is fine. Just do...

Sorry, from memory the gearbox is totally separate from the hydraulics which require HY Tran fluid. You will have a totally different filling point...

I didn't do a lot with a TS83 (3 furrow reversible) and so maybe it was like that. I used a TS81 and 2 x TS82 ploughs extensively, 2 on YL bodies,...

Zaza, Plough in the 1st video is how the ransomes 3f ploughs where I grew up were, and also there was still one here at work when I started in 81 but...

The plough in the first video has a turnover mechanism that I have never seen on a manual turnover Ransome plough. There is no collar that moves...

https://youtu.be/vwfU7-7ot6U https://youtu.be/2CNIHuBOPB4 ok will be next week before i get to look at the tractor, didnt know the n/s arm can be...

Thank you both. I will hold off

If you need a manual your sparex agent should be able to get you one of these- covers the smaller 3 pots up to your 4610, approx £38 list price - ...

What he said. Plus I would never drill grass seeds this early. We are pretty certain to get some lousy weather yet this Winter, we haven't had any...

Your IH 584 should pick the plough up high enough to enable turnover, even a MF 135 will do that. Make sure that your lift rods are short enough to...

You might be OK but there's quite a risk of very slow germination and the plants being under siege from slugs and other pests. If it's a droughty...

ok dont have stabiliser bars fitted, only other problem i am having now is the tractor wont lift the plough high enough for it to trip over without...

No, when you lift the plough it will centralise (always assuming of course that you don't have any stabiliser bars fitted to your tractor and that...

ok thanks that explains it very well, the cam mechanism was seized i have stripped that and cleaned it all up will try it again on saturday, this is...

The plough cross shaft is free to move approximately 1/4 of a turn and when the plough is lowered into work the linkage arms pull the pins on the end...

Thanks guys was thinking it is gonna be a top off job. Sounds like I've exhausted all the easy jobs, didn't want to miss something simple before it...