Search:

Type: Posts; User: agrimax

Page 1 of 20 1 2 3 4

Search: Search took 0.04 seconds.

  1. Replies
    1
    Views
    289

    Re: New Holland 7840 SLE

    Do you mean the o rings in the top cover on the throttle shaft that goes through the lid? Have you got fuel coming through the bleed screw on the filter head when you push the primer? Can you hear...
  2. Replies
    1
    Views
    341

    Re: Case 4240 steering heavy.

    Filter and mesh bypass filter definately clean? Priority valve in the bottom front of the mcv polished up with fine emery and certain it's sliding free? Any easier to turn with the front jacked up?...
  3. Replies
    5
    Views
    1,062

    Re: Kohler vee-twin 20hp petrol.

    The fuel pump could have a perished diaphragm allowing fuel back down the vacuum tube and into the sump,or,and I think it will be more likely,either the float in the carb has stuck or the needle...
  4. Replies
    3
    Views
    715

    Re: Case jxu105 loss of drive and pto

    Maybe lift the floor out of the cab and check the wiring harness and if there are any multiplugs not making contact.
  5. Replies
    3
    Views
    715

    Re: Case jxu105 loss of drive and pto

    It does still sound like the seat switch or the wires to it are at fault,although it could be the damper plate on the flywheel has failed.Hydraulics would still be working as the pump is engine...
  6. Replies
    36
    Views
    5,834

    Re: A bit more help please ? MF 135

    I saved the paragraph and also copied and pasted it but either way it still wouldn't show when I put it in a post here. It was in the preview ok but not after sending the post.
    Maybe need to look at...
  7. Replies
    36
    Views
    5,834

    Re: A bit more help please ? MF 135

    Well Snipping tool is now on my taskbar! I'll try it in the future and then maybe have a look at Foxit too. Ta folks.
  8. Replies
    36
    Views
    5,834

    Re: A bit more help please ? MF 135

    Thanks zaza.I'm on Win 10 using Firefox. I'll have a play around later.
  9. Replies
    36
    Views
    5,834

    Re: A bit more help please ? MF 135

    John, assuming the light to be the same as in my 6270, turn it anti-clockwise to the fully off position and then with a bit of pressure turn it some more and the lens will come off.
  10. Replies
    36
    Views
    5,834

    Re: A bit more help please ? MF 135

    Sorry to jump in front of you again John................:)

    Thought I could have copied and pasted or took a screen shot of a paragraph in a PDF manual but it won't let me!
    Basically,oil that has...
  11. Replies
    36
    Views
    5,834

    Re: A bit more help please ? MF 135

    It seems it's a simple enough job to replace the front seal in the pump. An old thread on it here.(4 cyl Perkins but the same set up)....
  12. Replies
    36
    Views
    5,834

    Re: A bit more help please ? MF 135

    Any pumps I've removed have came away very easily. I've never looked at replacing the seal in a DPA pump I'm afraid. I'd guess it would be better left to the experts...
  13. Replies
    36
    Views
    5,834

    Re: A bit more help please ? MF 135

    Take a note of the pump position in relation to the slotted holes where it's held on to the back of the timing case.They are usually in the middle anyway.Take the 3 bolts at the front off the gear...
  14. Replies
    36
    Views
    5,834

    Re: A bit more help please ? MF 135

    You mean a Perkins AD3.152 in there zaza. Unless someones changed it to a 35 engine of course!
    It would have to be the internal seal on the end of the pump that's leaking. Just remove everything as...
  15. Replies
    2
    Views
    1,580

    Re: IH 674 problems

    I'd suggest the priority valve in the mcv is stuck. If you look below the hyd filter but on the very bottom of the mcv block,there are 2 large plugs screwed up into the block. The one to the front...
  16. Replies
    1
    Views
    1,470

    Re: Oil change on JCB 260 skid steer

    http://jcbpro.ru/files/images/resized/products/3/2/32180-5b4b62dc32ea3.1100x800.jpgGoogle (and JCB parts) suggests this is the plug........
    Looks like a standard 6 sided allen key or hexagon bit in...
  17. Re: Stupid question but.............................

    I have a couple of Sealey ones as well. One switches on itself regularly but more so in low temperatures. The other decides itself whether it wants to be in metric or imperial but more often the...
  18. Re: 3 cylinder diesel ford engine in Sanderson Fork Lift

    Best take it off and get it serviced. Probably the metering valve is stuck although the regulating valve piston in the end you had off may be stuck as well. If you are confident enough,you could go...
  19. Replies
    4
    Views
    1,227

    Re: MF4225 hydraulics question

    Hi Christian,Can't seem to get that link to work either. That forum may be the same place as these links,I don't know....https://www.nuffieldtractor.com/index.php. Seems to go under this name...
  20. Replies
    4
    Views
    1,203

    Re: Air cooled engines

    Air cooled engines run hotter and however that affects things,creates problems in meeting emission targets.
  21. Replies
    7
    Views
    1,249

    Re: IH Hydro 84 Rough Running

    Just wondering,Did the Sekura cabbed hydros have an electric lift pump since the tank is lower down than those with the saddle tank behind the seat? Might be worth checking out......
  22. Replies
    7
    Views
    1,249

    Re: IH Hydro 84 Rough Running

    Or could be a blown head gasket..........
    Check the excess fuel/stop lever on the inj pump is travelling fully too.It's not stuck in the middle position by any chance? And check that the heater...
  23. Replies
    4
    Views
    2,306

    Re: International 574

    You say 574 in your first post and 475 in the second! If it's a 574,it should have a D239 engine.(D329 doesn't exist I think).
    If the engine hours are true,it hasn't done much in 30 years! Check the...
  24. Replies
    4
    Views
    1,227

    Re: MF4225 hydraulics question

    It'll be for float.It's the same on my MF 6270. Means you don't have to keep your hand on the lever when lowering a tipped trailer.
  25. Replies
    8
    Views
    2,716

    Re: Massey Ferguson 35 Fuel Injection Pump Issue

    But if it started and ran good on the borrowed pump it would still suggest that the new pump is the problem. It may be the correct fitting pump for a FE 35 but it mustn't be set up right internally....
Results 1 to 25 of 494
Page 1 of 20 1 2 3 4