Search:

Buckrake with our merlo and it's never gotten hot. Found with our previous T/C machines we've had, the T/C seems to looose efficiency once they get up around 5000hrs (serviced on the dot their whole...

:) Well I dont like to boast! The any other crop was a field of spring beans.
Hopefully be there on saturday. Got winter barley to cut first. Made a start this afternoon, coming off at 12% :eek:

Is that the prize winning field then jim?

Got a problem with my tx65. The issue is that when the forward reverse lever is in neutral the pump the combine will creep forward. I have a repair manual which says to disconnect the drive from the...

Thanks, will have to get one sorted for our merlo.

Do you have a link for the lights fitted for the puh ff?

my 415 will put a spool into constant pump with hms, so unless they have changed it on the new models?

yes you CAN also do this with a fendt, ok it may be slightly more complicated to set up initially as i've never used the john deere hms. but you most definitely can do this on a fendt.

You can do that with the hms, the rep obviously didn't know what he's on about.

can you elaborate on your reasonings?

Have you tried driving one? We demoed one when we were changing our merlo, bloody awful I found it, went for another merlo.

If it's the same as a kuhn, which I think it is, I just had ours off about a fortnight ago. Have to take the drum with all the knives on out. Then I had a set of two leg pullers that fit the two...

Do you mean the one with the screw on cartridge, if so another +1

How accurately does everyone cost each enterprise on their farm. I guess on a single enterprise farm it is relatively easy, things get a lot more complicated with multiple enterprises, beef, sheep,...

Have seen concrete laid by spreading the sand and gravel out then spraying water on and putting cement on top then going over it with a heavy duty rotovator to mix it. Just something else to...

My brother in law is looking for a farm worker. They have about 200 dairy cow and around 1200 ewes. Current lad has been there a long time but is moving to Canada,he did most of the tractor work I...

We sent that picture to the bay rescue people before they came, they must have sent it to all the newspapers etc. But yeah, wasn't expecting the Herald to be looking in here. It's in the sun now...

Had the herald on, they read about it on here though apparently! So who tipped them off?

I'm just wondering how I go about claiming royalties for my picture!

It's quite funny (or should that be worrying) how the story keeps getting elaborated, according to the express the seal had...

Yes the pond is ours, a couple of fishermen have said they have seen an otter in there, so it may have been living in there and been mistaken for an otter, though how it would get there in the first...

Found this little fella this morning whilst out for a walk! Quite a bit from the open sea, hopefully there is a link to Google maps with the location where we found him.


...

We started off with a ts270 years ago then went to a jcb 526s then went with a 32.6 merlo. Do about 5-6k hours (5 years) before before changing. Just done a deal to change the merlo. Liked the...

Has anyone taken the gearbox of the front of a Kuhn primor? Its turning out to be a bigger job then it looked. Just wondering if anyone had any tips. I think it has cracked/ broken a tooth on the...

+1 it's nice not to have every thread descend into a slagging match now, even if the forum is a bit quieter.... Keep up the good work!

Also there is a way of recalibrating the two switches but can't just remember how.