Results 1 to 4 of 4

Thread: Greenstar offset

  1. #1
    Member 6920s pilot's Avatar
    Join Date
    Feb 2013
    Location
    Lincolnshire
    Posts
    35

    Greenstar offset

    Been having a mental block today , I have been running the vaddy drill with a 2cm offset but it is still pulling slightly to the right.

    Can't remember which way round it works, does offsetting the dome to the right have the effect of shunting the tractor across to the left, or does offsetting right mean the machine moves to the right ?

    Don't need to move far, what I really want to know is ....... Does Box C need decreasing to 0.01 or increasing to 0.03 to solve my problem


  2. #2
    Senior Member Gerbert's Avatar
    Join Date
    Feb 2013
    Location
    Holland, biblebelt
    Posts
    272

    Re: Greenstar offset

    You have now given it an offset to the left so the tractor is on the right side of the middle.
    Remember, when you mow you have offset to the right .

  3. #3
    Member 6920s pilot's Avatar
    Join Date
    Feb 2013
    Location
    Lincolnshire
    Posts
    35

    Re: Greenstar offset

    So I need to reduce the figure in box C to send tractor and machine a little further to the left ?

  4. #4
    Senior Member Gerbert's Avatar
    Join Date
    Feb 2013
    Location
    Holland, biblebelt
    Posts
    272

    Re: Greenstar offset

    yes

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •