Results 1 to 5 of 5

Thread: GS3 command center

  1. #1
    Junior Member
    Join Date
    Feb 2013
    Location
    Scotland
    Posts
    14

    GS3 command center

    Got an 1800 screen with all the boundaries, AB lines and offsets on etc. Is it possible to transfer these from the 1800 to the new command center?

  2. #2

    Re: GS3 command center

    Only way is to put them in gatekeeper then back out to command screen

  3. #3
    Junior Member
    Join Date
    Feb 2013
    Location
    Scotland
    Posts
    14

    Re: GS3 command center

    Do John Deere dealers offer this service? Not going to buy gatekeeper just to transfer files.

  4. #4

    Re: GS3 command center

    depends on dealer
    you will need to talk to them

  5. #5
    Junior Member
    Join Date
    Feb 2013
    Location
    Scotland
    Posts
    14

    Re: GS3 command center

    Dealer told me to backup GS2 1800 and GS3 command center on to a USB stick.

    Use computer to copy the RCD file from the 1800 backup and paste it on to the command center RCD file.


    All boundaries, AB line and offset seem to have transferred ok

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •