Results 1 to 3 of 3

Thread: topcon q

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member
    Join Date
    Feb 2013
    Posts
    202

    topcon q

    why is the implement line not running straight behind my vehicle on the screen?

    also

    why when an a b line is made in the field
    do i see the next line as i turn into the next bout instead of seeing all the lines that are parallel to the a b line

  2. #2
    Senior Member
    Join Date
    Feb 2013
    Posts
    202

    Re: topcon q

    the answer to q 2 is that I had not specified straight lines but instead using adaptive curve
    but the first one eludes me for the moment
    Last edited by leashed; 22-04-14 at 09:32 AM.

  3. #3
    Junior Member
    Join Date
    Feb 2013
    Posts
    13

    Re: topcon q

    If its not running straight behind you , you have entered an offsett in to the implement geometry.
    You should have a value in
    A, working width
    B, overlap, should be normally set to zero
    C, hitch to rear of machine
    D, implement offsett., again normally set to zero but i guess yours may not be.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •