Results 1 to 12 of 12

Thread: FL and PTO for Jcb fastrac

  1. #1
    Member
    Join Date
    Apr 2013
    Location
    carlisle cumbria
    Posts
    41

    FL and PTO for Jcb fastrac

    Front linkage and PTO for Jcb fastrac

  2. #2
    Senior Member
    Join Date
    Oct 2013
    Location
    Wales
    Posts
    235

    Re: FL and PTO for Jcb fastrac

    ???

  3. #3
    Senior Member
    Join Date
    Feb 2013
    Location
    South Glos
    Posts
    1,061

    Re: FL and PTO for Jcb fastrac

    model/age might help!

  4. #4
    Member
    Join Date
    Apr 2013
    Location
    carlisle cumbria
    Posts
    41

    Re: FL and PTO for Jcb fastrac

    It's a 2001 3185 Fastrac do FL and PTO vary much between models?

  5. #5
    Senior Member
    Join Date
    Feb 2013
    Location
    Does unman yn debyg i adra
    Posts
    801

    Re: FL and PTO for Jcb fastrac

    PTO is guaranteed to be different as they use Cummins and Perkins engines of different size, age and tiers!!! Would eat my hat if they only have one style of linkage aswell.
    Ond lle bu'r arad' ar y ffridd Yn rhywgo'r gwanwyn pr o'r pridd

  6. #6
    Member
    Join Date
    Apr 2013
    Location
    carlisle cumbria
    Posts
    41

    Re: FL and PTO for Jcb fastrac

    A lot of the parts are bound to the same,I know there will be some different parts for different models

  7. #7
    Senior Member
    Join Date
    Oct 2013
    Location
    Wales
    Posts
    235

    Re: FL and PTO for Jcb fastrac

    can only go by the one I have and a few I've seen. the front pto seems to attach with a long shaft to the other side of the rear pto gearbox and seems to be a retrofit on a lot of them(I've been after front a pto kit myself) the front linkages seem the same on them all, well the older machines.

  8. #8
    Member
    Join Date
    Apr 2013
    Location
    carlisle cumbria
    Posts
    41

    Re: FL and PTO for Jcb fastrac

    Quote Originally Posted by banjo View Post
    can only go by the one I have and a few I've seen. the front pto seems to attach with a long shaft to the other side of the rear pto gearbox and seems to be a retrofit on a lot of them(I've been after front a pto kit myself) the front linkages seem the same on them all, well the older machines.
    I bet there is plenty out there on tractors that are never used aswell!

  9. #9
    Senior Member
    Join Date
    Oct 2013
    Location
    Wales
    Posts
    235

    Re: FL and PTO for Jcb fastrac

    Quote Originally Posted by jcb4star View Post
    I bet there is plenty out there on tractors that are never used aswell!
    I think your dead right there. it doesn't look very complicated at all, one plate off the transfer box , a shaft to the front and a bearing on the front around the pto shaft!
    has anyone tried jcb for an off the shelf part?
    I have to honest the only thing that lets the fastrac down is the jcb parts price, its mental money.

  10. #10
    Member
    Join Date
    Apr 2013
    Location
    carlisle cumbria
    Posts
    41

    Re: FL and PTO for Jcb fastrac

    Quote Originally Posted by banjo View Post
    I think your dead right there. it doesn't look very complicated at all, one plate off the transfer box , a shaft to the front and a bearing on the front around the pto shaft!
    has anyone tried jcb for an off the shelf part?
    I have to honest the only thing that lets the fastrac down is the jcb parts price, its mental money.
    Ha I got my local Jcb dealer to price the parts up 4600!!

  11. #11
    Member
    Join Date
    Apr 2013
    Location
    carlisle cumbria
    Posts
    41

    Re: FL and PTO for Jcb fastrac

    ??????anyone?

  12. #12
    Senior Member
    Join Date
    Feb 2013
    Location
    Aberdeenshire
    Posts
    697

    Re: FL and PTO for Jcb fastrac

    Quote Originally Posted by jcb4star View Post
    ??????anyone?
    Have you spoke to Harvey Milnes at Penistone ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •