Results 1 to 4 of 4

Thread: New Holland EZ-Pilot on Combines?

  1. #1
    Junior Member
    Join Date
    Sep 2013
    Location
    Berwickshire
    Posts
    10

    New Holland EZ-Pilot on Combines?

    Hi all!
    Has anybody got an EZ-Pilot fitted to a combine?
    If so, how does it work and what signal are you using?.
    Are you getting good accuracy?

    Thanks for reading!

  2. #2
    Member graybo's Avatar
    Join Date
    Feb 2013
    Location
    Beds
    Posts
    52

    Re: New Holland EZ-Pilot on Combines?

    Not a New Holland but fitted a Trimble EZ-Pilot to a JD CTS.

    Works very well, on RTK correction.

  3. #3
    Junior Member
    Join Date
    Sep 2013
    Location
    Berwickshire
    Posts
    10

    Re: New Holland EZ-Pilot on Combines?

    That's good too hear!
    Thanks for that.

    There must be other people using this on combines?

  4. #4
    Junior Member
    Join Date
    Feb 2013
    Posts
    2

    Re: New Holland EZ-Pilot on Combines?

    I used to have an old ez steer fitted to an Axial Flow with RTK.

    It was before T2 became standard, so was good on flatter fields, but not so good on undulating fields, purely as it didn't have any terrain compensation. You can see it here. http://youtu.be/zIcafgvceos Rubbish sound quality though.

    I know of a NH9080 near Morpeth that has a Ez Steer system on his combine.

    I know where you could get RTK, either radio or Ntrip from too.

    Hope this helps.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •