So in a moment of madness I acquired one of these to trim the hedges along the lane and garden which donít really want to be flailed.

I had forgotten that they had two adjustable components to enable fitting to a wide range of tractors.

These were an adjustable stabiliser bar (a standard tractor one will not do) and a drop arm which fixed the left side lift arm to the top link pin (you disconnected the lift arm from the lift rod) - the standard drop arm had 3 positions - it was termed the 'mounting arm' by Teagles.

These two components were missing. . I could probably make something up, but just wondered if someone had these bits kicking around somewhere (would even consider a complete trimmer in any condition provided those bits were there.


Cheers

David


(Nice to be back!!!)