Results 1 to 2 of 2

Thread: 1056xl....grey scum

  1. #1
    Senior Member
    Join Date
    Feb 2013
    Welshpool Powys

    1056xl....grey scum

    1056xl blowing grey scum out of breather, engine oil less than 50 hours old, head been off to do injector sleeves and new gasket fitted, doesnt seem to loose coolant, oil is still nice and clean, breaths a fair bit too....
    Any ideas?
    Could it be worn out bores? Engine pulling in cold damp air which is going past the rings and condensating maybe?

  2. #2
    Senior Member Gapples's Avatar
    Join Date
    Feb 2013
    North of Watford Gap

    Re: 1056xl....grey scum

    Sounds very like the beginnings of a porous liner problem.
    Is it ok when you start from cold then gradually start breathing worse as it gets up to temperature ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts