Results 1 to 4 of 4

Thread: Rear Wheel Spacer for Kubota L3200

  1. #1
    Junior Member
    Join Date
    Aug 2017
    Location
    Hampshire
    Posts
    1

    Rear Wheel Spacer for Kubota L3200

    I recently acquired a set of lawn tyres for my L3200, these were previously on an L4200.

    Unfortunately they are just slightly too wide and touch the wheel arch

    Solution would be to get rear wheel spacers, but I can only find some in America which will end up costing more than I paid for the tyres!!

    Is anyone aware of a supplier here in the UK or have any other ideas

    Thanks

  2. #2
    Senior Member
    Join Date
    Feb 2013
    Location
    Scotland
    Posts
    830

    Re: Rear Wheel Spacer for Kubota L3200

    A decent engineering place should be able to knock something like that up without much trouble

    Take a wheel in for them to use as a template.

  3. #3
    Senior Member
    Join Date
    Jan 2014
    Location
    NB Canada
    Posts
    476

    Re: Rear Wheel Spacer for Kubota L3200

    Find a couple of cheap spare rims and cut the centers out of them

  4. #4
    Senior Member
    Join Date
    May 2013
    Location
    NI
    Posts
    413

    Re: Rear Wheel Spacer for Kubota L3200

    The whole thing could be done on a laser cutter in a few minutes.

    You could save a few quid by making a simple line diagram and taking it to them. Inner diameter, outer diameter, diameter of the center line of the stud holes, and diameter of the stud holes themselves.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •