Results 1 to 7 of 7

Thread: Brakes master cylinders.

  1. #1
    DAG
    Guest

    Post Brakes master cylinders.

    Where is the best place to buy a seal kit from. make of cylinder is bendix, dealer says he can't get seal kit anymore only complete cylinder. Brakes are very soft and after a while they lose presure, if you pump them you will get presure, but you lose presure if you dont use brakes. leave tractor overnight and brakes are fine, we bleed the brakes but no air. tractor brakes are fine , new filters and oil in back end, oil is clean and not grey from brake wear. is there a way to test the master cylinder presure.

  2. #2
    9935452
    Guest

    Re: Brakes master cylinders.

    has the tractor got front brakes.
    We had a problem where the brakes were soft and would go to the ground and it turned out the front brakes needed bleeding. If we split the brakes and used left or right only we had a solid pedal and a good brake

  3. #3
    DAG
    Guest

    Re: Brakes master cylinders.

    yes the tractor does have front brakes, we have followed the manual but the problem still exists.

  4. #4
    joe soapy
    Guest

    Re: Brakes master cylinders.

    nelson brovex 01840213711

    if they are still going, will do most sizes. Very reasonable

  5. #5
    Footsfitter
    Guest

    Re: Brakes master cylinders.

    Quote Originally Posted by joe soapy View Post
    nelson brovex 01840213711

    if they are still going, will do most sizes. Very reasonable

    Looks like there has been a name change. Interesting company/contact

    http://www.nelsonstokes.com/products/repairkits.ashx




    ff


    .

  6. #6
    TP
    Guest

    Re: Brakes master cylinders.

    leaky trailer brake valve? Seen it many times on certain Italian jobs.

  7. #7
    joe soapy
    Guest

    Re: Brakes master cylinders.

    Quote Originally Posted by Footsfitter View Post
    Looks like there has been a name change. Interesting company/contact

    http://www.nelsonstokes.com/products/repairkits.ashx




    ff


    .
    Yea, I went for miles around devon and cornwall looking for class seals, nobody would open a box to measure seals. then eventualy was pointed in thier direction, loverly old chap came out with his calipers and measured what i wanted, asked how many, and charged me 5p each... real old fashioned service

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •