Results 1 to 3 of 3

Thread: MF135 wiring

  1. #1
    Junior Member
    Join Date
    May 2016
    Location
    Cumbria
    Posts
    13

    MF135 wiring

    Hi My MF135 has no wiring to the lights. Can anybody provide photos of the route that the standard harness takes from the headlights back to the dash.
    Thanks

  2. #2
    Senior Member
    Join Date
    Feb 2013
    Location
    Tasmania
    Posts
    847

    Re: MF135 wiring

    Quote Originally Posted by P1LTS View Post
    Hi My MF135 has no wiring to the lights. Can anybody provide photos of the route that the standard harness takes from the headlights back to the dash.
    Thanks
    From memory, the cable from the headlights comes thru a grommeted hole beside the radiator, along the edge of one of the side panels, then along the inside of the lower bonnet edge, held in place in both cases by metal spring clips. Somewhere near the battery, I think it enters the loom and presumably pops out near the switch.

    Also from memory, the tail/side lights cable goes thru a metal tube from under the dash, across the top front of the gearbox to above the back axle, then in a rubber tube on the wheel side of each mudguard. Can't remember how the cable gets from one guard to tother.

    Green Dragon might come along. He restored an industrial version recently.

    JV
    Last edited by john maddock; 30-03-18 at 12:46 PM.
    Agtronix - the home of the Weedswiper

  3. #3
    Junior Member
    Join Date
    May 2016
    Location
    Cumbria
    Posts
    13

    Re: MF135 wiring

    Thanks for that

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •