Results 1 to 4 of 4

Thread: JD 6200 wiring problem

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Junior Member
    Join Date
    Sep 2018
    Posts
    3

    JD 6200 wiring problem

    I recently was checking fuses in the fuse box to add on front work lights to which I could not get sorted so I ran a new live and neutral from battery till a small fuse box to which now runs the lights but now the stop and orange warning light only flash once when I turn the key on but before they flashed constant till I started the tractor any ideas

  2. #2
    Senior Member T P's Avatar
    Join Date
    Feb 2013
    Location
    The muddy edge of the biggest puddle in the uk
    Posts
    675

    Re: JD 6200 wiring problem

    If you disconnect the wires you fitted at the battery does it revert to normal or not? If not it's probably not the extra's you fitted that are at fault. If it does you have probably inadvertently provided a parallel path to some circuit or other.

  3. #3
    Junior Member
    Join Date
    Sep 2018
    Posts
    3

    Re: JD 6200 wiring problem

    Ok give that a try and see what happens

  4. #4
    Junior Member
    Join Date
    Sep 2018
    Posts
    3

    Re: JD 6200 wiring problem

    Got it sorted no idea what it was, only thing I can think of is that it was water round a sensor from me washing in round the back end which has now dried out.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •