Results 1 to 4 of 4

Thread: JCB 536-60

  1. #1
    Junior Member
    Join Date
    Feb 2013
    Posts
    14

    Question JCB 536-60

    Hello,

    I've been to look at a 536-60 tele handler, 7k hrs all seems good drives fine with no issues. Is there anything I need to look for?

    Any help would be appreciated.

    Thanks

  2. #2
    Senior Member
    Join Date
    Feb 2013
    Posts
    1,247

    Re: JCB 536-60

    Quote Originally Posted by reidser View Post
    Hello,

    I've been to look at a 536-60 tele handler, 7k hrs all seems good drives fine with no issues. Is there anything I need to look for?

    Any help would be appreciated.

    Thanks
    I have no idea specifically about the machine but have you checked:

    Run up to full working temperature to see that engine, transmission and hydraulics all work/perform as they should?

    Have you lifted the machine off the ground to check hub and swivel wear?

    Tipped the head stock to where it naturally wants to hang then manually rock it to see about bush/ pin play?

    Extend boom and gently pressure down on the ground to check telescopic wear?

    Apologies if that is all obvious.

  3. #3
    Junior Member
    Join Date
    Feb 2013
    Posts
    14

    Re: JCB 536-60

    Thanks for the reply,

    ended up going for a manitou mlt634.

  4. #4
    Senior Member Footsfitter's Avatar
    Join Date
    Feb 2013
    Location
    Basingstoke, Hants
    Posts
    2,737

    Re: JCB 536-60

    Quote Originally Posted by reidser View Post
    Thanks for the reply,

    ended up going for a manitou mlt634.

    http://www.aandrhandling.co.uk/

    Could be useful
    The best thing about Facebook is the logout button......

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •