Claas Ares 656 problems

[pronar111]

Hello!

In the last month our Claas Ares 656 RZ has been doing some wird problems. Sometimes, wile working, it will go only on idle engine speed and the transmision will remain stuck in the gear range that it is at the moment.
We thought that the problems were caused by the wiring harness from the engine and we have that replacet with a new one (all the wires from.the engine compartment) but it is still doing this.
We have a Claas mechanic that come with a diagnose computer but the tractor won't flash any code.
Has any one encountered this problem?

[Recycled]

The engine ECU's were known to give problems that wou ld be the first place to look ,

[GoldenEye]

You must repair engine ECU

[pronar111]

I can't find any place to check and repair the ecu in my country. I found David King Electronics in UK. Has any one some experience with them?

[Recycled]

Think you will be replacing it rather than trying to repair it .can your claas mechanic not get you one out of anothet
tractor to try it

[Jack_Caley]

I can't find any place to check and repair the ecu in my country. I found David King Electronics in UK. Has any one some experience with them?

Can recommend David King, he has worked for us for thirty years,
jack caley

[Footsfitter]

Can recommend David King, he has worked for us for thirty years,
jack caley

Kings repair for dealers and manufacturers too. They have been fixing Ag electronics for years.

[Jack_Caley]

Kings repair for dealers and manufacturers too. They have been fixing Ag electronics for years.

We started with David when he started up on his own. He had worked for Massey Ferguson before. It was in the old days when weightronics had a virtual monopoly of electronic weighing systems.
jack caley

[pronar111]

I have sent the ecu today to David. Is it possible that the engine ecu could influence the transmision because when the engine is not accelerating the transmision will onli stai in 4th range no matter what speed, even of it is in high or low?

[Recycled]

I have sent the ecu today to David. Is it possible that the engine ecu could influence the transmision because when the engine is not accelerating the transmision will onli stai in 4th range no matter what speed, even of it is in high or low?

Yes it's all connected