Hi I have a 1985 matbro teleram it won’t cut the blocks out clean on the pit it would go half way and stop it’s like she doesn’t have enough pressure to cut any ideas?
Hi I have a 1985 matbro teleram it won’t cut the blocks out clean on the pit it would go half way and stop it’s like she doesn’t have enough pressure to cut any ideas?
Test the pressure, its probably the pump worn out. or maybe your quick release fittings are incompatible.Originally Posted by massey mad
An old Teleram probably doesn't operate at the high pressure a more modern matbro does and even they are not that high so maybe you need a different attachment or its blunt!
Most likely blunt cutting blades, you can take the shoulder off the blades with a grinder but they need to be sharpened with a file or they won't cut. Dry silage is difficult to cut so keep it sharp.
It must be the pump on the matbro I put the shear grab on the tractor and it cut it really good. I tested the pressure on the matbro and it was around 2000 were the tractor was nearly 3000.
Posting Permissions
Reply With Quote