Results 1 to 3 of 3

Thread: Karcher HDS 745

  1. #1
    Senior Member
    Join Date
    Feb 2013
    Posts
    1,683

    Karcher HDS 745

    I was using my Karcher HDS 745 pressure washer/steam cleaner today and I unfortunately let go of the triigger on the lance when I had got a fair bit of heat on. I always reckon to turn the heat off and let the water coming out of teh lance cool down to normal temperature before I release the trigger. The problem is that it won't start up again. I let it cool down for an hour, emptied the water tank, and still it won't start up. Instead it just blows the fuse in the 13amp 3 pin plug.

    Can anyone give me any hints as to what might be wrong please ? I've got the PDF manual and I'll read it later but I wondered if there are any Karcher gurus on here who could give me any advice or help ? TIA for any kind person who can.

  2. #2
    Senior Member Recycled's Avatar
    Join Date
    Feb 2013
    Posts
    664

    Re: Karcher HDS 745

    sounds like theres pressure somewhere between the pump and the lance , sticky pressure switch

  3. #3
    Senior Member
    Join Date
    Feb 2013
    Posts
    1,683

    Re: Karcher HDS 745

    Thanks. I've got the manual so I'l have a look.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •