Results 1 to 3 of 3

Thread: Autosteer and front press

  1. #1
    KJL
    Guest

    Autosteer and front press

    Anyone running a front press with auto steer? Running one on Omnistar G2 and having trouble stopping weaving. What do I need to be looking at? Have tried usual aggression setting changes etc. Still weaves a bit when press is lifted but worse when its down. It's a Topcon system.

  2. #2
    Rob
    Guest

    Re: Autosteer and front press

    Are you one of ours (lh agro) ???
    If so pm me and I'll see what I can do to help
    Rob

  3. #3
    An Gof
    Guest

    Re: Autosteer and front press

    Quote Originally Posted by KJL View Post
    Anyone running a front press with auto steer? Running one on Omnistar G2 and having trouble stopping weaving. What do I need to be looking at? Have tried usual aggression setting changes etc. Still weaves a bit when press is lifted but worse when its down. It's a Topcon system.
    Dalers will probably be along in a minute to explain this to you, I think he encountered similar problems with a JD system. Do a search on here as its been covered before.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •