Results 1 to 9 of 9

Thread: How to change blade holder on pz cm165 mower

  1. #1
    Junior Member
    Join Date
    May 2016
    Location
    pembrokeshire
    Posts
    4

    How to change blade holder on pz cm165 mower

    Hi I have just bought a PZ cm165 mower and I need to replace a blade holder, I have slackened the 3 Hexi nuts but the bottom drum saucer is not loose,is there any other things that have to come off before it will come off.

    Many thanks Peter

  2. #2
    Senior Member
    Join Date
    Feb 2013
    Location
    Glamorgan
    Posts
    1,872

    Re: How to change blade holder on pz cm165 mower

    Maybe sezied on -iron bar it a bit-soak with diesel etc.
    Did a samaza one a while ago and just dropped off.

  3. #3
    Junior Member
    Join Date
    May 2016
    Location
    pembrokeshire
    Posts
    4

    Re: How to change blade holder on pz cm165 mower

    [QUOTE=RGT;269439]Maybe sezied on -iron bar it a bit-soak with diesel etc.
    Did a samaza one a while ago and just dropped off.

    Thank you, so it should just drop off, or give it some "gentle" persuasion

  4. #4
    Member
    Join Date
    Mar 2013
    Location
    Surrey
    Posts
    58

    Re: How to change blade holder on pz cm165 mower

    Was common to weld them in place once they got worn as they would come loose all the time.

  5. #5
    Senior Member
    Join Date
    Feb 2013
    Posts
    1,250

    Re: How to change blade holder on pz cm165 mower

    Yes should drop the bottom disc off an then you can access the sprung steel holders. I have in the past manged to weld a peg back in after an argument with a foreign body.

  6. #6
    Senior Member
    Join Date
    Feb 2013
    Location
    Scotland
    Posts
    926

    Re: How to change blade holder on pz cm165 mower

    Work your way round the outside edge with a club hammer, hitting it up the way. And keep your toes out of the way

  7. #7
    Junior Member
    Join Date
    May 2016
    Location
    pembrokeshire
    Posts
    4

    Re: How to change blade holder on pz cm165 mower

    okay thank you for your help... I will have ago

  8. #8
    Senior Member
    Join Date
    Oct 2013
    Location
    west wales
    Posts
    414

    Re: How to change blade holder on pz cm165 mower

    Twice I've had mine off by sledge hammering in wooden wedges.......this time they won't budge.

  9. #9
    Junior Member
    Join Date
    May 2016
    Location
    pembrokeshire
    Posts
    4

    Re: How to change blade holder on pz cm165 mower

    Thank you every one got it off. and got the blade holder of the shelf at my local parts store from 12 quid cheaper than on ebay

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •